|Flow Rate (cubic meters/hr)||3000-4000, >4000, 1000-2000, 2000-3000, 500-1000|
|Valve Size||1.5 ", 2", >2", 2|
|Vessel Diameter||0-200 mm, 200-400 mm, 600-800 mm, 400-600 mm, 800-1000 mm|
|Vessel Height||>1800 mm, 500-800 mm, 1600-1800 mm, 1200-1600 mm, 1000-1200 mm, 800-1000 mm|
|Media Quantity||50-100 kg, 400-800 kg, 800-1200 kg, >1200 kg, 100-400 kg, 0-50 kg|
We offer a wide assortment of Pressure Sand Filter that we extensively used to filter water and remove suspended particle, color and odor from it. Pressure Sand Filter is an ideal solution for the systems with high sediment, silt, sand, and turbidity. The sand filters are specially designed to take care of the range of suspended impurities. The purpose of this filtration is to remove any particulate matter left over after flocculation and settling. The filter process operates based on two principles, mechanical straining and physical adsorption.
The filter is equipped with certain valves and device which are incorporated in the outlet –pipe system the propose of the device is to maintain a constant rate of filtration an important components of the regulation system is the venture mater which meager the bad resistant or loss of head when the resistant built up the operator open the regulation valves so as to maintain a steady rate of filtration when the loss of head exceed 1.3 meter it is uneconomical to run the filter.
Normally the filter may run weeks or even month without cleaning when the bed resistant increase to such an extant that the regulation valves has to be kept fully open it is time to clean the filter bed since any further increase is drained off and the sand bed is clean by scraping of the top portion of the sand layer to a depth of 1 or 2 cm this operation may be carried out by unskilled laborers using hand tool or by mechanical equipment after several year of operation and say 20 or 30 scraping the thickness of the sand bed will have reduced to about 0.5 to 0.8 meter then the plant is closed down and a new bed is constructed.
The advantages of a slow sand filter are 1) simple to construction and operation 2) the cost of construction cheaper than that of rapid sand filters 3) the physical chemical and bacteriological quality of filter water is very high when working ideally, slow sand filter have been shown to reduce total bacterial counts by 99.9 to 99.9 per cent and E.coil by 99 to 99.9 per cent
In recent year a mistaken idea has grown that biological or slow sand filtration is an old fashioned outdated method of water treatment which has been completely superseded by rapid sand filtration this is defiantly not the case slow sand filtration is still the chosen method of water purification in a number of high industrialized cities as well as urban areas in a number of cities.
|Vessel Diameter||0-200 mm, 800-1000 mm, 400-600 mm, 200-400 mm, 600-800 mm|
|Flow Rate (cubic meters/hr)||1000-2000, 3000-4000, 2000-3000, 500-1000, 0-500, >4000|
|Valve Size||1/2 , 3/4 , 1 , 1.5 , 2, >2|
|Vessel Height||800-1000 mm, 1200-1600 mm, 1600-1800 mm, 500-800 mm, >1800 mm, 1000-1200 mm|